Proceedings of International Symposia


​19.   Zhang, H.F., Chen, X, Gao, J, Lam K.H., Shi, D.L., Fei, L.F., Mak, C.L, Chen, J.F. “The fabrication and electrocaloric effect of bimodal-grain structure (Ba0.60Sr0.40)TiO3 using the induced abnormal grain growth method”. The 11th International Conference on High-Performance Ceramics, IOP Conf. Series: Materials Science and Engineering, Vol.678, 012138 (2019)

18.  Qi, L., Zhang, Q., Lam, K.H., Guo, R., Chen, R., Huang, J., Meng, R., Wang, Z., Zheng, H. and Qian, M. “Calcium fluorescence response of human breast cancer cells by 50-MHz ultrasound microbeam stimulation”. 2017 IEEE International Ultrasonics Symposium (in press)

17. Li, S., Lam, K.H. and Cheng, K.W.E. “Development of a motor waste heat power generation system based on thermoelectric generators”. 2016 International Symposium on Electrical Engineering (ISEE) (in press)

16.    Wong, C.M., Chen, Y., Luo, H.S., Dai, J.Y., Lam, K.H. and Chan, H.L.W. “An ultrawide bandwidth high frequency phased-array ultrasound transducer fabricated using the PMN-0.3PT single crystal”. 2016 IEEE International Ultrasonics Symposium (in press)

15.    Li, Y., Chen, R., Lee, C., Lin, M., Lim, H., Zhang, B, Lam, K.H. and Shung, K.K. “Recent advances in developing biomedical applications of single beam acoustic tweezers”. 2015 IEEE International Ultrasonics Symposium (in press)

14.    Lam, K.H., Zheng, F., Li, Y., Zhou, Q. and Shung, K.K. “Zebrafish egg manipulation using ultrasound microbeam”. 2013 IEEE International Ultrasonics Symposium, pp.303–305 (2013)
13.    Lam, K.H., Li, Y., Lee, C., Zhou, Q. and Shung, K.K. “Ultrahigh frequency ultrasound microbeam for biomedical applications”. 2012 IEEE International Ultrasonics Symposium, pp.1994–1997 (2012)
12.    Hwang, J.Y., Lee, N.S., Lee, C., Lam, K.H., Kim, H.H., Zhou, Q., Chow, R.H. and Shung, K.K. “High–frequency ultrasound microbeam induced calcium elevations in cancer cells: discrimination between invasive and non–invasive breast cancer cells”. 2012 IEEE International Ultrasonics Symposium, pp.596–599 (2012)
11.    Chen, Z.H., Ni, Y.Q., Lam, K.H. and Or, S.W., “Nonlinear neural emulation of forward and inverse dynamics for a self–sensing magnetorheological damper”. Proceedings of The Fifth International Workshop on Advanced Smart Materials and Smart Structures Technology, pp.556–563 (2009)
10.    Chen, Z.H., Ni, Y.Q., Lam, K.H. and Or, S.W., “Modelling of a self–sensing magnetorheological damper using Bayesian regulated Narx neural network”. Proceedings of The First International Postgraduate Conference on Infrastructure and Environment, pp.575–582 (2009)
9.    Lam, K.H., Wang, S., Kwok, K.W., Zhao, X.Z. and Chan, H.L.W. “Piezoelectric cymbal array for energy harvesting”. Proceedings of The International Symposium on Smart Materials and Devices and Workshop on Microfluidics and its Applications, Poster No.: S2P 24p (2007)
8.    Lam, K.H., Chen, Z.H., Ni, Y.Q., Or, S.W. and Chan, H.L.W. “Smart magnetorheological dampers with an embedded sensor for vibration control applications”. Proceedings of The 3rd International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII–3), Paper No.: 120 (2007)
7.    Chen, Z.H., Ni, Y.Q., Or, S.W. and Lam, K.H. “A tailor–made MR damper for bridge cable vibration control: experiment and modelling”. Proceedings of The World Forum on Smart Materials and Smart Structures Technology (2007)
6.    Lam, K.H., Wang, X.X. and Chan, H.L.W. “(Bi0.5Na0.5)0.94Ba0.06TiO3 / P(VDF–TrFE) 0–3 composites poled with a sinusoidal electric field”. Proceedings of IEEE International Symposium on Applications of Ferroelectrics, pp.101–104 (2006)
5.   Lam, K.H., Chan, H.L.W., “Properties of PMN–PT fibre / epoxy 1–3 composites for high–frequency transducer applications”. Proceedings of the Advanced Smart Materials and Smart Structures Technology, pp.593–600 (2004)
4.    Lam, K.H., Chan, H.L.W., Choy, C.L., Luo, E.Z. and Wilson, I.H. “Studies of proton irradiated 0.9PMN–0.1PT/P(VDF–TrFE) 0–3 composites”. Proceedings of IEEE International Symposium on Applications of Ferroelectrics, pp.33–36 (2002)
3.    Li, K., Wang, D.Y., Lam, K.H., Chan, H.L.W., Choy, C.L. “Samarium and manganese doped lead titanate ceramic fiber / epoxy 1–3 composites for high frequency transducer applications”. Proceedings of Fourth Pacific Rim International Conference on Advanced Materials and Processing, Vol.2, pp.1603 (2001)
2.    Li, K., Lam, K.H., Wang, D.Y., Chan, H.L.W., Choy, C.L. “Studies of Li, Nb and Mn doped PZT ceramic fibers and ceramic fiber / epoxy 1–3 composites”. Proceedings of Fourth Pacific Rim International Conference on Advanced Materials and Processing, Vol.2, pp.1583 (2001)
​1.    Lam, K.H., Chan, H.L.W., Choy, C.L., Luo, H.S., Yin, Q.R. and Yin, Z.W.  “Study of the poling of 0.65PMN–0.35PT single crystals and their application in cymbal actuators”. Proceedings of Fourth Pacific Rim International Conference on Advanced Materials and Processing, Vol.2, pp.1911 (2001)

K. H. (Koko) Lam - The Hong Kong Polytechnic University © All rights reserved.

K. H. (Koko) LAM Research group